Dokument Art.Nr. 97000101 ~ 10 ~
1. Installation
Danger of electrical shock, danger of burns, damage to equipment and malfunctioning. The VDE
0100 and VDE 0800 standards are to be complied with during installation. (Germany)
Countermeasures:
Switch off and uncouple all electrical lines before starting work.
Secure them against mistakenly being recoupled and switched back on.
Test them to ensure that they do not conduct electricity.
Cover neighbouring components that conduct or are capable of conducting electricity.
All work carried out and all electrical connections should comply with the regulations of the individual
country and be performed by specially trained technicians.
DIN VDE 0100 is to be observed and complied with when appliances with 230V connections
are installed.
2. Terminal identification
To Next Page
Loading...
