sks BS2012 User Manual

Dokument Art.Nr. 97000101 ~ 11 ~
3. Installation instructions BS2012
Use a screwdriver to gently push in the bottom clip
and remove the front.
Attach the rear of the intercom unit to the flush
mounting box using the two screws. When fully
assembled, the cable must not be squashed or bent
sharply. Only insert the necessary wires into the
device.
Bolt the rear part with two screws with the flush box.

sks BS2012 Specifications

General

Brand	sks
Model	BS2012
Category	Intercom System
Language	English