Skullcandy Indy User Manual (English)

To Next Page

User Guide

GETTING STARTED WITH INDY

FIRST TIME PAIRING

Because true wireless audio is still pretty new, Indy may be your first experience with this

technology. But pairing Indy to your device for the first time is actually really simple. You just

have to follow three easy steps:

1. Remove your Indy earbuds from the package

2. Place them in the charging case, and make sure the LEDs turn red, then close the case.

3. Now remove your earbuds from the case.

This process will automatically turn Indy on and put it into pairing mode. You can then select

Indy from your device’s list of Bluetooth devices.

TROUBLESHOOTING

When people have trouble with true wireless audio, it’s usually related to Bluetooth pairing. If

you can’t get Indy to pair to your phone or your earbuds are having trouble connecting to one

another, here’s how you reset Indy to resolve pairing issues.

1. Place your Indy earbuds in the charging case.

2. Remove Indy from your device’s paired list.

3. Turn off Bluetooth mode on your device (mobile or computer)

4. Power on only your right Indy earbud by removing it from the case. It will be in a non-

connected state at this point.

5. Tap the center of the earbud 4x. This will automatically power off the earbud and reset

it. You will know this was successful when the light on the earbud turns red. If the light

does not turn red please repeat step 5 until the light turns red. Place the right earbud back

in the case.

6. Now repeat those same steps only with the left earbud. (steps 4 and 5)

7. Next, remove both earbuds from the case to have them automatically power on and begin

pairing to one another.

8. You’ll hear one beep indicating the buds have paired together, and then a voice prompt

that will notify you that Indy is now “Pairing”, meaning it’s searching for your device.

9. At this point, turn your device’s Bluetooth mode back on and re-pair to Indy.

Need help?

Do you have a question about the Skullcandy Indy and is the answer not in the manual?

Skullcandy Indy Specifications

General

Impedance	16 Ω
Driver unit	6 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	95 dB
Total Harmonic Distortion (THD)	3 %
Headset type	Binaural
Product type	Headset
Product color	Indigo
Wearing style	In-ear
Volume control	Touch
Recommended usage	Calls/Music
Protection features	Dust resistant, Sweat resistant, Water resistant
International Protection (IP) code	IP55
Bluetooth version	5.0
Connectivity technology	Wireless
Continuous audio playback time	16 h
Microphone type	Built-in