To Next PageTo Next Page
Need help?Do you have a question about the SKY-WATCHER 1145EQ1 and is the answer not in the manual?
General| Brand | SKY-WATCHER |
|---|---|
| Model | 1145EQ1 |
| Category | Telescope |
| Language | English |
Follow instructions carefully for assembly and choose a large, open area for unpacking and setup.
Never look directly at the sun; permanent eye damage will result. Use a proper solar filter.
Details on telescope design, dimensions, power, and weight for the EQ1 mount.
Contact information for customer support and inquiries about telephotographs.
Instructions for attaching the mount to the tripod and installing the accessory tray.
Diagrams guiding the placement of the mount into an upright position.
Steps for installing counterweight, control cables, and attaching tube rings to the mount.
Finding the center of balance and securely fastening the telescope tube within the rings.
Locating and attaching the finderscope bracket to the main telescope body.
Removing the end-cap and securing the eyepiece in the focuser tube with thumbscrews.
Focusing the main telescope and aligning finderscope crosshairs with the object.
Performing R.A. and Dec. balancing for smooth operation and precise adjustments.
Controls for altitude, azimuth, right ascension, and declination for astronomical observing.
Inserting eyepieces and Barlow lenses into the focuser for magnification.
Replacing dust caps, cleaning optics, and allowing time for temperature equalization.
