Need help?Do you have a question about the SKY-WATCHER EQ3-2 and is the answer not in the manual?
General| Mount Type | Equatorial |
|---|---|
| Payload Capacity | 5 kg |
| Slow Motion Controls | Yes |
| Load Capacity | 5 kg |
| Tripod | Aluminum |
| Tripod Height | 71 cm to 123 cm |
Detailed instructions for setting up the tripod for the NEQ3 equatorial mount.
Step-by-step guide for assembling telescope components onto the NEQ3 mount.
Instructions for attaching the telescope tube rings to the mount.
Steps for assembling the finderscope or red dot finder onto the telescope.
Guidance on inserting eyepieces into the focuser for different telescope types.
Instructions for setting up the tripod for the EQ5 equatorial mount.
Step-by-step guide for assembling telescope components onto the EQ5 mount.
Instructions for attaching the telescope tube rings to the mount.
Steps for assembling the finderscope onto the telescope.
Guidance on inserting eyepieces into the focuser for refractor telescopes.
Procedure for aligning the finderscope with the main telescope for accurate aiming.
How to use the Red Dot Finder and its controls for aiming.
Steps for balancing the telescope along the Right Ascension axis.
Steps for balancing the telescope along the Declination axis.
Importance and use of the leveling bubble for optimal telescope performance.
Formula and explanation for calculating telescope magnification based on focal lengths.
How to calculate the true field of view using eyepiece apparent field and magnification.
Method for determining the exit pupil size for optimal light gathering.
Factors defining sky conditions: seeing and transparency.
Criteria for choosing an optimal observing location away from pollution.
Factors influencing the best time for astronomical observation.
Importance of allowing the telescope to reach ambient temperature.
Tips for preparing eyes for optimal night vision observation.
Detailed steps for aligning the mirrors of a Newtonian reflector telescope.
Procedure for adjusting the secondary mirror for proper collimation.
Initial steps for preparing the equatorial mount for polar alignment.
Procedure to align the polar scope's reticule with the mount's polar axis.
Adjusting the mount's altitude to match the local latitude.
Using star patterns to achieve a simplified polar alignment.
Polar alignment method for the Southern Hemisphere using star patterns.
Description of the SynScan system for NEQ3 and EQ5 mounts.
Details on dual axis motor drives for precise telescope tracking.
Details on single axis motor drives for telescope tracking.
Description of a special eyepiece for precise telescope collimation.
Description of wide-angle eyepieces for an expanded field of view.
Description of a multi-purpose flashlight with red and white light modes.
List of recommended books for amateur astronomy.
List of recommended books for astrophotography.
List of recommended references for astronomical observation.
To Next Page