Sky Way Swing - Clutch Release Mechanism; Control Box Installation

⑺ Fix the gearmotor to the front bracket and anchor it with the appendant
screw s (D) and w ashers (C) with the gearmotor
,
fully tighten the
screw
.
(Fig9)
P10
front bracket
w
P1
0
5.Clutch Release
(Fig.11 & Fig.12) Release the clutch: Insert the release key and turn
it clockwise for 180°. Engage the clutch: Insert the release key and
turn it 180°in an opposite direction.
control box
(unit: mm)