15
Access control panel
How can I access my Sky Hub’s control panel?
You can control a variety of settings in your Sky Hub’s
control panel such as changing your network name
and password.
To log into your Sky Hub’s control panel via your internet
browser:
• In the address bar of your browser type http://192.168.0.1/
• The username is admin
• The password is sky unless you changed it
Resetting your Sky Hub
How do I reset to factory settings?
Ensure your Sky Hub is plugged in at the mains and
switched on. Then, press and hold the reset button
on the back of the device until the power light begins
to flash green. This can take up to 10 seconds.
Don’t unplug or switch off your Sky Hub while it resets.
The power light will flash amber then will return to solid
green when completed.
To Next Page
Loading...
