EasyManua.ls Logo

Sky Sky+HD - Connecting your Sky±HD box to your broadband router

Sky Sky+HD
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Let’s get started
9
Connecting your Sky±HD box to your broadband router
If your Sky±HD box has built-in Wi-Fi connectivity (DRX890W and
DRX895W models only), then simply connect it to your broadband
router via Wi-Fi to start enjoying On Demand including Catch Up TV.
It can be connected to a wide variety of broadband routers from
any broadband provider. There are three ways of connecting your
Sky±HD box to your broadband router using Wi-Fi.
Firstly, check if your broadband router has a WPS (Wi-Fi Protected
Setup) button
.
A If your broadband router has a WPS button:
1 Press and hold the WPS button on your broadband router for
2 seconds.
2 Within one minute press the WPS button on the front panel
of your Sky±HD box. Your Sky±HD box should connect to your
broadband router automatically.
B If your broadband router does not have a WPS button, or you don’t
want to connect by WPS, then you can connect by entering the Wi-Fi
password:
1 Press services, 0, 5 on your remote control and this will take you
to the Network tab. Three options for connecting your Sky±HD
box are displayed.
2 Choose Connect with Password using your remote control and
press select.
3 Select the name (SSID) of your broadband network from the list
provided. This can usually be found on the back or bottom of the
broadband router, next to the password.
4 Enter the password using your remote control and press select
to connect.
C If you prefer to connect your broadband router using a WPS PIN,
then just select Connect with WPS PIN from the Network tab and
follow the on-screen instructions.
If your Sky±HD box does not have built-in Wi-Fi then you can still
connect to your broadband router via Wi-Fi using an On Demand
Connector. Visit sky.com/ondemand to find out more. You can
also connect any Sky±HD box to your broadband router using an
Ethernet cable.
When connecting your Sky±HD box to your broadband router via
Wi-Fi, please ensure you have enabled security on your wireless
network and that a strong password has been set. Please also
ensure that you only share your wireless network password with
trusted people as connecting your Sky±HD box will allow certain
other devices (with Sky software or applications installed) on
your wireless network to access information on your Sky±HD
box, such as a list of your Planner recordings.
18

Table of Contents

Other manuals for Sky Sky+HD

Related product manuals