Your Sky±HD box connections
4
Switching on Dolby® Digital audio
With the digital audio outputs you can connect your Sky±HD box to a
compatible home cinema system and listen to programmes broadcast in
Dolby® Digital audio. For this you need an optical, coaxial or HDMI* cable (not
supplied) and you need to change the default settings on your Sky±HD box:
1 Press services, scroll right and select Settings, and then select the
Sound tab.
2 Highlight Digital Audio Output – Optical or Highlight Digital Audio
Output - HDMI* and use the left/right arrow to choose Dolby D.
Press the
green button (Save Settings) when you’re done.
Some older amplifiers may not support Dolby® Digital audio.
* Dolby Digital over HDMI is available on DRX890W, DRX895W, DRX890 and DRX895 models only.
92
To Next Page
Loading...
