8 Skydio X10 - Quick Start Guide © 2023 Skydio, Inc. All rights reserved.
Unboxing Skydio X10
Step 1 - Remove Skydio X10 from the case
Open your Starter Case. Reach down and grip Skydio X10 by the chassis and li it
upward to remove. Do not li X10 using the sensor package, arms, or rear.
Step 2 - Unfold the rear arms
Hold the drone with the sensor package facing away from you. Pull laterally away
from the chassis until you feel the arm seat into place.
Preflight
Step 3 - Unfold the front arms
Push down and forward. Gently continue until you feel the arm seat into place.
To Next Page
Loading...
