Skydio X10 - Skydio X10 Starter Kit

12 Skydio X10 - Quick Start Guide © 2023 Skydio, Inc. All rights reserved.
Charging the Skydio X10 Controller
Preflight
Step 1 - Locate the USB-C charge port
The charging port is located on the back of the controller.
Step 2 - Insert the 100 W power supply
Connect your Skydio X10 Controller to the 100 W power supply. Plug into a power
source. The lights on the front of the controller will turn on and indicate the level of
charge.