15 Skydio X10 - Quick Start Guide © 2023 Skydio, Inc. All rights reserved.
Step 6 - Pair the drone and controller
Use the USB-C pairing cable to connect your devices. Wait as pairing completes.
• The lights on the drone will turn solid blue and the name of your drone will
appear on the screen when pairing is successful.
• Once paired, the drone and the controller will automatically connect before
future flights.
Preflight
Step 7 - Remove the sensor package lock
Gently pull to remove from the top of your drone.
• Save this piece to reattach when storing or transporting
To Next Page
Loading...
