Example:
Channel 1: X2 has no Rev, Failsafe value is set to be 1500, min travel is 1000, max is 2000.
Channel 2: Y2 has no Rev, Failsafe value is set to be 1500, min travel is 1000, max is 2000.
Channel 3: Yl has no Rev, Failsafe value is 900, min travel is 1000, max is 2000.
Channel 4: Xl has no Rev, Failsafe value is set to be 1500, min travel is 1000, max is 2000.
……… and vice versa, view adjustment horizontally is much easier for setting. Just tick related item.
Attention:
1. Please select the value between 900-2100, Failsafe hold select “O”.
2. Please clicks SAVE at the right upper corner to keep the record. The selected value will be written to the controller and
receiver.
6. Save and download the data (Diagram 3,4,5).
To Next Page
Loading...