Skydroid T10 - Part 2: Receiver and Flight Controller Setup; Receiver Binding Process

In order to quicker change from model to model, or large scale set up, we can save the data in the APP so that you can find it
out easily.
As illustrated: when finished the adjustment, click” “then Save Configuration. Then rename the model and save it. Same as
download the data.
Attention: Adjusted parameters only save in the APP, Click “write” to load data to the controller. Sound “Di” means
communication succeeded.
Part 2: Receiver, Flight controller connection and set up
1. Binding: Press the paring button on the side of the receiver and hold for 2 seconds; you can enter the paring mode, then