Skyjack 4632 - Page 166

SECTION 6, Page 83
SJIII Series - The Conventionals 129919
Figure 6.4-1. Hydraulic/Electric Tray Assembly
Index
No.
Skyjack
Part No.
DescriptionQty.
1 125443 1 WELDMENT, Hydraulic/electric tray (Standard)
125735 1 WELDMENT, Hydraulic/electric tray (EE-Rated)
2 118983 1 PIN, Tray Bottom
3 100335 2 BUSHING, Bronze
4 125821 1 TRIM, Protective
5 100446 1 PIN, Tray Upper Eccentric
6 107949 1 NUT, Hex Jam 1/2”-13
7 125798 1 BOLT, Carriage 1/2”-13 x 1.5” Gr. 5
8 132767 1 ASSEMBLY, Weight (If equipped with Internal Compensator Valve)
125426 1 ASSEMBLY, Weight (If equipped with External Compensator Valve)
9 119020 1 PLATE, Motor mounting
127060 2 • BOLT, Hex-hd 1/2’ - 13 x 4” lg. Gr.5
103468 2 • WASHER, Flat 1/2”
103470 2 • WASHER, Lock 1/2”
10 (Ref.) 1 ASSEMBLY, Pump and Motor
- (For components, refer to Figure 6.4-2)
103887 4 • BOLT, Hex-hd 5/16 - 18 x 3/4” lg.
103404 4 • WASHER, Flat 5/16”
103996 4 • WASHER, Lock 5/16”
11 (Ref.) 1 ASSEMBLY, Electrical Panel
- (For component, refer to Figures 6.6-1, or 6.6-2)
112495 4 • BOLT, Hex head .25 - 20 x 3/8” lg.
12 109568 1 ASSEMBLY, Filter Return
103864 2 • BOLT, Hex-hd 5/16-18 x 1" lg.
104254 1 • ELEMENT, Filter
123022 1 • SEAL, Filter Assembly
123021 1 • COVER, Filter Assembly
123020 1 • SPRING, Filter Assembly
122973 1 • CASTING, Aluminum
121571 1 • SCREW, Set
122969 3 • BOLT, Washer Combined
122968 1 • CASING, Filter
109052 1 • FITTING, Connector
112495 4 • BOLT, Hex head .25 - 20 x 3/8” lg.
13 107271 1 VALVE, Pull-type lowering
14 107493 1 MANIFOLD, Lowering valve
103069 1 • FITTING, Connector
15 109267 1 COVER, Hydraulic tank
16 102693 1 CAP W/GASKET, Filler/breather
103962 3 • SCREW, Machine #10-32 x 1/2" lg.
Parts list continued on the following page.
AH