Skyjack 4632 - Page 167

SECTION 6, Page 85
SJIII Series - The Conventionals 129919
Figure 6.4-1. Hydraulic/Electric Tray Assembly (Continued)
Index
No.
Skyjack
Part No.
DescriptionQty.
Parts list continued from the previous page.
17 103962 14 SCREW, Machine #10-32 x 1/2" lg.
18 103320 1 CLAMP, Worm #16
19 102918 1 HOSE, Tank 1”
20 125800 1 SCREW, Slotted Round Head 3/8”-16 x 1” Gr. 5
21 108575 1 NUT, Hex Jam 3/8”-16 Gr. B
22 111954 1 LATCH ASSEMBLY, Hydraulic/Electric Tray
102780 1 • LATCH, Tray
111534 1 • KNOB, Latch
103857 1 • BOLT, Hex-hd 1/4-20 x 1" Gr. 5.
104000 1 • WASHER, Lock 1/4"
103864 3 • BOLT, Hex-hd 5/16-18 x 1" Gr. 5
103404 3 • WASHER, Lock 5/16” Gr. 5
103980 1 • NUT, Hex Hd 1/4”-20 Gr. 5
23 124311 2 INSERT, Threaded (Not Needed if Ordering Gauge Assembly)
24 103236 1 GAUGE, Oil level/temperature
25 120190 1 SEAL, Magnetic drain plug
26 117701 1 PLUG, Magnetic drain
27 (Ref.) 1 ASSEMBLY, Proportional Control Manifold
- (For components, refer to Figure 6.4-4)
103860 2 • BOLT, Hex-hd 1/4”-20 x 1.75” Gr. 5
103995 2 • WASHER, Flat 1/4”
104000 2 • WASHER, Lock 1/4”
28 102971 2 BRACKET, Cylinder mounting
103855 2 • BOLT, Hex-hd 1/4” - 20 x 1/2” Gr. 5
104000 2 • WASHER, Lock 1/4”
103995 2 • WASHER, Flat 1/4”
29 124291 1 CYLINDER, Cushion
30 (Ref.) - MANIFOLD ASSEMBLY, Main
- (For components, refer to Figure 6.4-5)
103873 1 • BOLT, Hex-hd 3/8” - 16 x 2 1/2” Gr. 5
103472 1 • WASHER, Flat 3/8”
103999 1 • WASHER, Lock 3/8”
31 133940 2 BOLT, Hex head 1/2”-13 x3-3/4” Grd. 5
NOTE: For Pothole Protection Device Parts, Refer to Figure 6.3-2