Need help?Do you have a question about the Skyjack 6832RT and is the answer not in the manual?
General| Platform Height | 32 ft |
|---|---|
| Working Height | 38 ft |
| Platform Capacity | 500 lbs |
| Drive Speed | 3.5 mph |
| Gradeability | 30% |
| Power Source | Diesel |
| Platform Extension | 5 ft |
Details the manual's applicability to different versions and regional standards.
Emphasizes operator adherence to safety rules and proper machine usage.
Warns about lack of insulation and need for safe approach distance to power lines.
Lists critical safety measures to prevent tip-over, crushing, falling, and other hazards.
Provides detailed specifications and features for the ANSI/CSA version of the models.
Provides detailed specifications and features for the CE version of the models.
Provides detailed specifications and features for the AS version of the models.
Details the record-keeping requirements for annual inspections.
Lists the maximum allowable capacities for the platform under different configurations.
Provides floor loading pressure data for ANSI/CSA, CE, and AS versions.
Lists recommended fluids for various parts of the rough terrain scissor lift.
Outlines daily, monthly, and yearly maintenance and inspection tasks.
Provides a checklist for operators to perform pre-operation inspections.
Provides graphical representations of electrical and hydraulic components and symbols.
Details hydraulic component parts, schematics, and manifold port identification.
Covers electrical components, control box, harness, and panel wiring diagrams.
Illustrates wiring diagrams for specific optional equipment like inverters and outrigger controls.
Addresses common electrical issues and their potential causes and solutions.
Addresses common hydraulic system problems, their causes, and remedies.
Provides guidance on maintaining and repairing the hydraulic system and its components.
Details safe procedures for winching, towing, and manually releasing the parking brake.
Explains how to adjust system lift and pressure using a calibrated gauge.
Covers inspection, torquing, and reinstallation procedures for wheels.
Guides through setting up and calibrating the auto-leveling outrigger system.
Provides instructions on how to properly order replacement parts.
Explains the format and referencing system used for listing parts in the manual.
Details how common hardware items are presented and should be ordered.
Outlines the step-by-step process for placing an order for repair parts.
To Next Page