Need help?Do you have a question about the Skyjack SJ12 E and is the answer not in the manual?
General| Brand | Skyjack |
|---|---|
| Model | SJ12 E |
| Category | Lifting Systems |
| Language | English |
Guidelines for understanding manual instructions, safety, and operator responsibilities.
Identification of the main structural and functional components of the MEWP.
Details on the serial number plate and the information it contains for identification.
Defines responsibilities for maintenance by operator and owner.
Information on risks and safe distances from electrical conductors.
General safety rules and precautions for operating the MEWP.
Guidance on fall protection systems and safe entry/exit procedures.
Procedure for inspecting the worksite for potential hazards before operation.
Diagram and identification of the main components of the MEWP.
Location and purpose of the weather-resistant manual storage box.
Explanation of the main power disconnect and base control console.
Description of various features like drive speed, tilt switch, etc.
Details on diagnostic switch, display panel, circuit breakers, AC socket.
Information on optional features like dual flashing lights and telematics.
Operator's duties for inspections and function tests before operation.
Step-by-step visual checks for MEWP components.
Procedures for testing various MEWP functions.
Checklists for daily visual inspections and function tests.
Steps to power up and prepare the base control console.
Procedure for operating platform lift/lower functions using the base console.
Steps to power up and prepare the platform control console.
Procedure for operating platform lift/lower functions from the platform.
Instructions for moving the MEWP in forward and reverse directions.
How to steer the MEWP using the control handle.
Procedure for moving the platform horizontally.
Operation using the optional SGLE platform control.
Steps for safely powering down and parking the MEWP.
Procedure for lowering the platform in case of primary power failure.
Steps to manually release the MEWP brakes.
Instructions for operating the MEWP from the ground.
Procedures for manually moving the MEWP.
Guidelines for loading and securing the MEWP for transport.
Procedure for accessing the MEWP's hydraulic and electrical systems.
Instructions for safely charging the MEWP's batteries.
How to use the service pin for maintenance.
Lists standard and optional equipment for different MEWP models.
Template and instructions for recording annual inspections.
Detailed technical specifications for SJ12 E, SJ16 E, SJ20 E models.
Load limits and capacity information for platform use.
Information on EMC, hazardous locations, and operating temperatures.
Data on how the MEWP distributes weight on surfaces.
Identification of labels and components on the rear of the MEWP.
Identification of labels and components on the left side of the MEWP.
Identification of labels and components on the front of the MEWP.
Identification of labels and components on the right side of the MEWP.
Details and labels for the platform control console.
Identification of labels and components on the top of the MEWP.
Identification of labels inside the platform area.
Identification of labels inside the base compartment.
Labels related to optional equipment like wind rating console.
Information on Skyjack's range of accessory products.
To Next Page
