Skyjack SJIII 3215 User Manual

The Compacts and Conventionals
Models 3215, 3219, 3220, 3226,
3220m And 3226m
SJIII
TM
Series
For Service please call ..................................................................... 800 275-9522
Skyjack Inc. Service Center, 3451 Swenson Ave., St. Charles, IL. 60174 .... FAX 630 262-0006
For Parts in North America and Asia please call .....................................
800 965-4626
Skyjack Inc. Parts Center, 3451 Swenson Ave., St. Charles, IL. 60174 .............. FAX 888 782-4825
For Parts & Service in Europe please call....................................................
31 297 255 526
Skyjack Europe Communicatieweg 29, 3641 SG Mijdrecht Netherlands ............. FAX 31 297 256 948
122908AD-A Printed in Canada Dec. 2002
OPERATING MANUAL
This manual MUST be kept and stored with the aerial platform at all times.

Skyjack SJIII 3215 Specifications

General

Platform Height	15 ft
Platform Capacity	500 lbs
Weight	2, 445 lbs
Power Source	24V DC
Working Height	21 ft
Overall Length	5 ft 7 in
Drive Speed (Elevated)	0.5 mph
Gradeability	25%
Maximum Working Height	21 ft
Drive Motor	24V DC
Stowed Height (Rails Up)	6 ft 8 in
Turning Radius (Outside)	63 in
Tire Type	Solid

Summary

Warranty Statement

Warranty Procedures

Details the process for filing and handling customer warranty claims.

Section 1 Introduction

Warnings

Operator Warnings

Lists critical "DO NOT" actions for safe operation of the platform.

Work Platform Conditions

Jobsite Hazards

Warns about site-specific dangers like holes, debris, and inclines.

Work Platform Major Component Identification

Section 2 Operation

Base Controls

Operator's Control Box

Identification And Operation Of Safety Devices

Explains the identification and operation of key safety devices.

Safety Bar

Pothole Protection Device

Operator Qualifications

Outlines the requirements and training for operating the work platform.

Operating Procedures

Set-Up Procedure

Step-by-step guide for preparing the platform before use.

Prestart Checks

Essential checks to perform before starting the work platform.

Operator's Checklist

Start And Operation

Guides on how to start the platform and perform basic operations.

To Lower the Platform

Instructions for safely lowering the work platform.

To Drive Forward or Reverse

Guidance on driving the platform in different directions.

To Steer

Emergency Lowering System

Details the system for lowering the platform during electrical failure.

Shutdown Procedure

Steps to safely shut down the work platform.

Battery Service And Charging Procedures

Battery Service

Safety precautions and procedures for servicing batteries.

Battery Charging Procedures EE-Rated Machines

Safety and procedures for charging batteries on EE-rated machines.

Servicing The Batteries

Battery Charger Operation

Describes the operation and status indicators of Battery Charger 2.1.

Battery Charger 2.2

Battery Charger 2.3