Skyjack SJ12 E - 4.4 Operators checklist

49
SJ12 E, SJ16 E, SJ20 E
243762ABA
Operator’s checklist Section 4 – Inspections Before Operation
P N/A Comments
Visual and Daily Maintenance Inspections
Labels - Do an inspection for damaged, or missing labels
Electrical - Do an inspection for loose, damaged or missing components
Limit switches - Do an inspection for loose, damaged or missing
components
Hydraulic - Do an inspection for loose, damaged or missing components
Base - Do an inspection for loose, damaged or missing components
Base weldment
Display panel
Steer cylinder
Battery charger
Pothole protection
Wheel/tire assembly - Do an inspection for loose, damaged, or missing
components
Wheel/tire assembly
Wheel nuts
Platform assembly - Do an inspection for loose, damaged, or missing
components
Platform
Fall protection anchorages
AC power socket
Platform control console
Manual storage box
Hydraulic/electrical compartment - Do an inspection for leaks and loose,
damaged, or missing components
Batteries
Manifold
Hydraulic tank
Hydraulic oil level
Hydraulic pump and motor
Steer linkages
Wheel/motor assembly
Motor controller
Lift mechanism - Do an inspection for loose, damaged, or missing
components
Mast assembly
Wear pads
Serial Number:
Model:
Hourmeter Reading:
Date:
Time:
N/A NOT APPLICABLE
Operator’s Name
(Printed):
Operator’s Signature:
Use the applicable section of the operation manual to
inspect each item. Check or complete the applicable box
for each item as you inspect it.
SJ12 E, SJ16 E, SJ20 E
Daily Operator’s Checklist
P PASS
Add a comment if the item does not pass inspection.
2155AAPage 1 of 2
4.4 Operator’s checklist (page 1 of 2)