Page 42 December 2007
SJ 46A & SJ 46AJ
Function Tests Section 2 - Operation
Test Brakes•
WARNING
Brakes will engage instantly when
you release footswitch, causing aerial
platform to stop immediately.
1. Restart engine.
2. Move aerial platform to a firm level surface
to ensure similar traction on left and
right.
3. Ensure boom is in stowed position.
4. Depress and hold footswitch and drive
aerial platform first “ ” forward then “ ”
reverse.
5. Remove your foot from footswitch.
Result: Aerial platform should come to
an abrupt stop. If aerial platform does not
stop immediately, or if aerial platform pulls
to one side while stopping, do not operate
aerial platform until brake adjustments
have been checked.
Test Manual Platform Leveling•
1. Depress and hold footswitch.
2. On platform leveling override switch, select
“
” up position to tilt platform up
or “
” down position to tilt platform
down.
Result: Platform should tilt up or down.
Drive/Steer
Controller
Horn
Engine start/on/off
Switch
To Next Page
Loading...
Need help?
General
