SkyLink wc-400 User Manual

5
STEP 3 – cONfIrm camEra IP SETTING
This step shows you the IP setting of the camera. You do not need to change any
settings here if you only have one IP Camera. You can simply click “Next”. You will
need to enter the user name and password of the camera. The default user name
is “admin”, leave the password eld blank.
Please ensure you remember the port number, cause it is needed when you setup
the camera in the Internet Hub. If you have more than one IP Camera, please
change the Port number. Default is 81. For the 2nd camera, you may use Port 82,
for the 3rd, you may use 83 etc.

SkyLink wc-400 Specifications

General

Brand	SkyLink
Model	wc-400
Category	Security Camera
Language	English