Skymaster ARF F-18 - User Manual

Skymaster ARF F-18 Instructions Manual
All manuals and user guides at all-guides.com
all-guides.com

Summary

Front Section and Nose Gear Assembly

Install front fuel tank before installing nose cone

Setup front servo and nose gear control

Install the front servo and connect piano wires for nose gear operation.

Install batteries for CG balance

Place two batteries in the nose cone to achieve the correct Center of Gravity.

Rudder and Elevator Assembly

Set up rudder fins screws

Secure rudder fins using thread lock or spring washers for a tight fit.

Install elevator servos

Install elevator shafts and servo arms

Connect elevator push-pull rods

Connect the push-pull rods for elevator servo control.

Set up elevator movement range

Adjust elevator up/down movement to 40-45 mm for each side.

Aileron and Flap Assembly

Glue aileron servo mounts

Connect aileron push-pull rods

Connect the push-pull rods for aileron servo control.

Install aileron servos

Set up flaps servos and RC system

Set up aileron movement range

Adjust aileron up/down movement to 12-18 mm for each side.

Set up flaps movement for takeoff

Configure flaps for down movement of 20-25 mm for takeoff.

Set up flaps movement for landing

Configure flaps for down movement of 60 mm for landing.

Retracts and Fuel Pump Installation

Install retracts and break servos

Skymaster ARF F-18 Specifications

General

Brand	Skymaster
Model	ARF F-18
Category	Toy
Language	English