The PC21 by Skymaster
The 1/4 PC21 produced by Skymaster is the result of years of R&D work and excessive testing. We are proud that
you have decided to buy the best ARF 1/4 PC21 in the market today. We hope you enjoy your PC21 Please note
that the photos show certain views from the prototypes. Some modifications and upgrades might have taken place
by the release of the model. We have tried to produce a very scale replica of this turbo prop. This manual describes
the assembling of “ PRO” model. Landing gear and doors are factory installed. Before you start building and set-
ting-up your aircraft, please make sure you have read this instruction manual, and understood it. If you have any
questions, please don’t hesitate to contact us. Below are the contact details:
Office Taiwan:
No.15, Min-San 3rd Street, Ren-Wu Area, Kaohsiung, 814, Taiwan, R.O.C.
TEL: +886 9 3299 7923
FAX: + 886 7373 1215
http://www.skymasterjet.com
Sales : skymasterjets@hotmail.com
Technical support : morne.m@pixie.co.za
SM © 2015
1/4 Scale Almost-Ready-To-Fly RC Model
Assembly and operations manual
Spesifications
Scale : 1/4 Length : 112.5”: (2850mm) Span : 90 ”: (2288mm)
Weight : 18Kg Engine : Jetcat SPT5 Radio : 12 Ch (8 servos)
To Next Page
Need help?
General
