The F-16 “Fighting Falcon” by Skymaster
The 1/5 F16 produced by Skymaster is the result of years of R&D work and excessive testing. We are proud that
you have decided to buy the best ARF 1/5 F16 in the market today. We hope you enjoy your F16! Please note that
the photos show certain views from the prototypes. Some modifications and upgrades might have taken place by
the release of the model. We have tried to produce a very scale replica of this classic jet. Many scale options are
included with your model including operating canopy, speed brakes, spoilers and ordinance kit. This manual de-
scribes the assembling of “ PRO” model. Opening canopy, speed brakes, landing gear and doors are factory in-
stalled. Before you start building and setting-up your aircraft, please make sure you have read this instruction man-
ual, and understood it. If you have any questions, please don’t hesitate to contact us. Below are the contact details:
Office Taiwan:
No.15, Min-San 3rd Street, Ren-Wu Area, Kaohsiung, 814, Taiwan, R.O.C.
TEL: +886 9 3299 7923
FAX: + 886 7373 1215
http://www.skymasterjet.com
Sales : skymaste@skymasterjet.com
Technical support : morne.m@pixie.co.za
SM © 2015
1/5 Scale Almost-Ready-To-Fly RC Jet
Assembly and operations manual
Spesifications
Type : T.A.V.S ARF PRO
Scale : 1/5
Length : 120.5”: (3060mm)
Span : 80.5 ”: (2550mm)
Weight : 21—23 Kg
Engine : 1 x 18-21 Kg
Radio : 12 Ch ( 8—11servo’s)
To Next Page
Need help?
General
