Need help?Do you have a question about the Skyrc Imax B6 and is the answer not in the manual?
General| Max Charge Power | 50W |
|---|---|
| Max Discharge Power | 5W |
| Charge Current Range | 0.1-5.0A |
| Discharge Current Range | 0.1-1.0A |
| NiMH/NiCd Cells | 1-15 cells |
| Pb Battery Voltage | 2-20V |
| Weight | 277g |
| Dimensions | 133 x 87 x 33mm |
| Input Voltage | 11-18V DC |
| Li-ion/Polymer Cells | 1-6 cells |
| Battery Types | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
Overview of the IMAX-B6 rapid charger, its microprocessor, and specialized operating software.
AUTO function prevents overcharging and alarms on malfunctions for enhanced safety.
Uses an individual-cell voltage balancer, eliminating the need for an external one.
Monitors and balances each cell during discharge, terminating on abnormalities.
Supports Li-ion, LiPo, and LiFe series of lithium batteries.
Offers fast charging or storage mode to control final voltage for longevity.
Allows PC analysis of battery characteristics, voltage, current, and capacity curves via USB.
Delta-peak sensitivity and automatic termination prevent overcharging and voltage threshold issues.
Allows setting an upper limit for charging current in NiCd/NiMH AUTO mode.
Stops charging automatically if the accumulated charging capacity exceeds the set limit.
Terminates charge if battery temperature reaches a set limit, requires optional probe.
Option to limit the maximum process time to prevent potential defects.
Stores data for up to five batteries for convenient program setting recall.
Supports 1-5 cycles of charge/discharge or discharge/charge for battery refreshing.
Illustrates correct connection for balance charging Lithium Polymer batteries and warns against improper connection.
Emphasizes reading the manual, avoiding unattended operation, keeping dry, and using on suitable surfaces.
Details voltage levels, max charge voltage, allowable fast charge current, and discharge cutoff for various battery types.
Lists battery types that should not be charged/discharged and emphasizes correct connection sequence.
Guides on selecting programs, setting current, checking voltage and connections before charging.
Explains discharging purpose, lithium battery discharge recommendations, and battery memory effect.
Visual representation of the charger's program selection and navigation paths.
Further illustration of program flow for various battery types and data save/load functions.
Guides initial setup and configuring Lithium battery parameters like voltage and cell count.
Configures Delta-peak sensitivity for automatic charge termination in NiMH and NiCd batteries.
Enables and sets the maximum temperature for automatic charge termination using a probe.
Sets delay time for cooling and an integrated safety timer to prevent overcharging.
Explains how to calculate the safety timer value based on capacity and current.
Configures maximum capacity protection, input power low voltage cutoff, and audible feedback.
Details settings for Lithium batteries, including nominal voltage, charge technique, and final voltage.
Describes standard charging for Li-Po/Ion/Fe batteries without using the balance lead.
Explains balance charging for Lithium-polymer cells, requiring a balance lead connection.
Details the fast charge mode, where charging current reduces towards the end for quicker completion.
Describes the program for charging/discharging batteries to a specific 'storage' voltage state.
Explains how the charger monitors individual cell voltages during storage/discharge and reports errors.
Covers charging NiCd/NiMH batteries for R/C applications, including auto and manual modes.
Details setting discharge current and final voltage for NiCd/NiMH batteries and stopping the process.
Explains setting up charge/discharge sequences and the number of cycles for battery refreshing.
Describes charging Pb (lead-acid) batteries, optimal current, and recommendations for capacity cut-off.
Outlines the process for discharging Pb batteries, including setting current and voltage.
Allows storing specifications for up to five batteries for easy recall.
Shows settings for NiMH charge current limit and discharge parameters.
Displays setup for NiMH charge/discharge sequences and cycle numbers.
Explains how to load previously saved battery data for charging or discharging.
Shows final voltage, capacity cut-off status, and value after program completion.
Displays safety timer duration and temperature cut-off status.
Shows external temperature (with probe) and the charger's input voltage.
Allows monitoring of individual cell voltages in connected battery packs.
Describes errors like reverse polarity, connection break, and output short circuit.
Covers input voltage protection errors and incorrect battery pack voltage selection.
Explains 'Break Down' error and 'Battery Check Low Voltage' warning.
Details warnings for high battery voltage, low/high cell voltage, and connection errors.
Indicates a failure in the processor's control of feeding current, requiring repair.
Details the product's one-year warranty, conditions, and service requirements.
To Next Page
