Need help?Do you have a question about the Skyrc B6AC+ DUAL POWER and is the answer not in the manual?
General| Cell Count (LiPo/LiFe/Li-ion) | 1-6S |
|---|---|
| Cell Count (NiMH/NiCd) | 1-15 cells |
| Pb Battery Voltage | 2-20V |
| Input Voltage | 100-240V AC / 11-18V DC |
| Charge Current | 0.1-6.0A |
| Battery Types Supported | LiPo, LiFe, Li-ion, NiMH, NiCd, Pb |
AUTO function for safe charging/discharging with two-way linkage and communication.
Store up to 10 charge/discharge profiles for convenient recall and setup.
Allows user to change the end voltage for expert use.
PC software for monitoring, control, and firmware updates.
Control and operate the charger via smartphone apps using a WiFi module.
Employs an individual-cell-voltage balancer for balance charging without external units.
Monitors and balances individual cells during discharge, stopping if abnormal.
Supports various lithium battery types like LiPo, Lilon, and LiFe.
'Fast' charge reduces duration, 'store' state protects battery for long-term storage.
Peaks battery 1-3 times automatically to confirm full charge.
Auto termination based on Delta-peak voltage detection for NiMH/NiCd.
1-5 cycles of charge/discharge for battery refreshing and balancing.
Sets upper limit for charging current on NiMH/NiCd for safety.
Checks battery's total, highest, lowest, and individual cell voltages.
Checks battery's total and individual cell internal resistance.
Stops process automatically if charging capacity exceeds the set maximum value.
Terminates process if battery temperature reaches a set limit (requires optional probe).
Limits the maximum process time to avoid potential defects.
Never leave unattended, keep away from elements, use on heat-resistant surface, check battery specs.
Details voltages for various battery types: nominal, max charge, storage, fast charge, min discharge.
Lists battery types that should not be charged or discharged with this unit.
Ensures correct program, current, voltage, and secure connections before charging.
Details charge quantity calculation, permissible current, and connection polarity.
Emphasizes careful connection of lithium batteries and warns against arbitrary disassembly.
Explains discharge purpose, voltage settings, and lithium battery discharge limitations.
Explains memory effect in NiCd/NiMH batteries and its impact on performance.
Explains the function of BATT PROG/STOP, DEC, INC, and ENTER/START buttons.
How to alter parameter values by pressing START/ENTER to blink and using DEC/INC.
How to start a process (hold START/ENTER) or stop it (press BATT PROG/STOP).
Default entry into LiPo Balance Charge and how to switch modes or enter other programs.
How to connect the charger to the AC power source (100-240V AC).
Emphasizes checking parameters and correct connection sequence to avoid damage.
For lithium batteries, connecting balance wire with correct polarity alignment.
Two ways to set the charger: using memory profiles or manual setup.
Navigating and selecting battery programs using INC/DEC and START/ENTER.
Navigating and selecting operating modes (e.g., Balance Charge) using INC/DEC and START/ENTER.
Setting battery type, voltage, and cell number using START/ENTER, INC/DEC.
Initiating the charge/discharge process by holding START/ENTER for 3 seconds.
Verifying detected cells against set cells and starting the process.
Real-time display of battery type, cell count, current, voltage, time, and capacity.
Querying cell voltage, input voltage, temperature, and timer settings during operation.
How to stop the charging process during operation using the STOP button.
Notification of program completion via an audible sound.
Summarizes operation programs (CHARGE, DISCHARGE, etc.) for different battery types.
Program to store up to 10 charge/discharge profiles with settings like battery type, voltage, and current.
Step-by-step guide to set battery type, voltage, charge/discharge current, and discharge voltage.
Process of saving configured battery programs to memory slots.
How to recall stored battery profiles and initiate the process.
Configures an integral safety timer to prevent overcharging, adjustable from 1-720 minutes.
Sets a maximum charge capacity to automatically stop the process.
Terminates process if battery temperature reaches a preset limit.
Allows choosing between Celsius and Fahrenheit for temperature display.
Configures a rest time between charging/discharging cycles for battery cooling.
Adjusts delta peak sensitivity for NiMH/NiCd battery full charge detection.
Controls audible feedback for button presses and operational alerts.
Protects input battery by terminating operation if voltage drops below a set threshold.
Option to restore the charger to its default factory settings.
Displays the hardware and firmware version of the charger.
Displays the unique serial number of the charger.
Diagram showing correct connection for checking battery voltage.
How to enter the Lithium Battery Meter program using BATT/PROGRAM and START/ENTER.
Screen shows individual cell voltages after connection.
Screen shows total, highest, and lowest voltages of the battery pack.
Diagram showing correct connection for checking battery resistance.
How to enter the Lithium Battery Resistance program.
Screen indicates resistance of each cell.
Screen indicates total, highest, and lowest resistance of the battery pack.
Explains that errors are shown on screen with audible alerts.
Lists common errors like REVERSE POLARITY, CONNECTION BREAK, CELL ERROR, etc.
Software for monitoring, control, and firmware updates via PC.
Requires a USB cable (not included) for connecting the charger to a computer.
The "Charge Master" software can be downloaded from www.skyrc.com.
Lists all items included in the product package.
Details input voltages, display type, case material, size, weight, and PC communications.
Lists external ports, delta peak detection range, and charge cutoff temperature.
Covers charge voltage for different battery types, balance current, and reading voltage range.
Details supported battery types, cell counts, and capacity ranges.
Lists charge/discharge current/wattage, safety timer, discharge cut-off voltage.
Mentions memory capacity, balance cells, and charge methods (CC/CV, Delta-peak).
States compliance with relevant CE directives and FCC Part 15 Subpart B.
Lists tested standards like EN 55014, EN 61000, EN 60335 for EMC and safety.
Explains the symbol for proper disposal of electrical waste.
Defines final charge voltage and final discharge voltage for battery management.
Explains units for current and capacity measurement.
Defines 'C'-rating for recommended charge/discharge currents based on battery capacity.
Explains how to determine nominal voltage for NiCd, NiMH, LiPo, LiIon, LiFe batteries.
States limitations of liability for misuse or use outside intended purpose.
Details the one-year warranty for manufacturing/assembly defects from the purchase date.
Instructions for contacting dealers for repair/replacement and warranty invalidation conditions.
To Next Page
