Need help?Do you have a question about the Skyrc S100 neo and is the answer not in the manual?
General| Input Voltage | AC 100-240V |
|---|---|
| Charge Wattage | 100W |
| Discharge Wattage | 10W |
| Battery Type | LiPo, LiFe, LiIon, LiHv, NiMH, NiCd, Pb |
| LiPo/LiFe/LiIon/LiHv Cell Count | 1-6S |
| NiMH/NiCd Cell Count | 1-15S |
| Pb Voltage | 2-20V |
| Display | LCD |
| Weight | 450g |
| Charge Current | 0.1-10A |
| Discharge Current | 0.1-2.0A |
Lists the charger, user manual, and AC power cord as included items.
Set battery type, cell count, task, condition, and current for charging.
Start, stop, or navigate through the program steps.
Set battery type, cell count, task, current, and temperature cut-off.
Start, stop, or navigate through the program steps.
Set battery type, cell count, task, and current for charging.
Start, stop, or navigate through the program steps.
Set the output voltage and current for DC power supply.
Start DC power mode and connect external DC equipment.
SkyRC disclaims liability for damage from improper use or operation.
Covers manufacturing defects for one year; excludes misuse damage.
To Next Page
