Need help?Do you have a question about the Skyrc D200 neo and is the answer not in the manual?
General| Brand | Skyrc |
|---|---|
| Model | D200 neo |
| Category | Battery Charger |
| Language | English |
Essential safety guidelines to prevent hazards during operation, covering unattended charging, battery condition, and environmental factors.
Button used to switch between charging ports A and B, and to exit system settings.
Used to navigate menus, select parameters, confirm settings, and access system settings.
Details the two input options for power: AC 100-240V and DC 10-30V.
Provides crucial safety advice and steps for connecting LiPo batteries with a balancer adapter.
Navigate to the main charging setup menu by pressing the scroll button.
Select the appropriate battery chemistry from the available LiPo, LiFe, Lilon, LiHV options.
Choose the correct number of cells for the selected battery type.
Choose the desired operation mode such as Charge, Storage, or Discharge.
Configure the automatic shut-off voltage for the charging process.
Set the desired current for charging or discharging the battery.
Initiate the charging or discharging process after configuration.
Terminate the ongoing charging or discharging program.
Navigate to the main charging setup menu by pressing the scroll button.
Select the appropriate battery chemistry from NiMH or NiCd options.
Choose the correct number of cells for the selected battery type.
Choose the desired operation mode such as Charge, Re-Peak, or Cycle.
Set the automatic shut-off parameters for the charging process.
Set the desired current for charging or discharging the battery.
Initiate the charging or discharging process after configuration.
Terminate the ongoing charging or discharging program.
Navigate to the main charging setup menu by pressing the scroll button.
Select the appropriate battery chemistry, specifically for Pb (Lead-Acid) batteries.
Choose the correct number of cells for the selected battery type.
Choose the desired operation mode like Normal, AGM Charge, or Cold Charge.
Set the automatic shut-off voltage parameters for the charging process.
Set the desired current for charging or discharging the battery.
Initiate the charging or discharging process after configuration.
Terminate the ongoing charging or discharging program.
Manufacturer's limitation of liability regarding product usage and potential damages.
Information on legal obligations for returning and disposing of used batteries.
To Next Page
