Need help?Do you have a question about the Skyrc Ultimate Duo and is the answer not in the manual?
General| Brand | Skyrc |
|---|---|
| Model | Ultimate Duo |
| Category | AC Power Distribution |
| Language | English |
Allows charging two batteries simultaneously with intelligent auto-charging, supporting different battery chemistries.
Supplies 150 Watts DC power and supports power distribution between channels for flexible output.
Stores up to 10 charge/discharge profiles per channel for quick recall and setup.
Employs an individual-cell balancer, eliminating the need for an external balancer.
Details AC (100-240V) and DC (11-18V) power input options for the charger.
Guides on connecting LiPo batteries using a balance adapter, emphasizing correct polarity.
Provides instructions for connecting NiMH/NiCd or Pb batteries to the charger.
Explains how to operate the charger using AC power, including power distribution between channels.
Details how to operate the charger using a DC power source, specifying voltage and power requirements.
Important steps for connecting the battery to the charger, including checking parameters and balance socket usage.
Outlines the step-by-step process for manually setting up charging programs for lithium batteries.
Details various information displayed on the LCD screen during the charging/discharging process.
Guides on choosing battery types (NiMH/NiCd) and available charge modes.
Instructions for setting up and starting a standard charge for NiMH/NiCd batteries.
Explains the auto-detect feature for NiMH/NiCd batteries, optimizing charge parameters.
Details the process for discharging NiMH/NiCd batteries, including setting discharge rate and voltage cut-off.
Explains the cycling process (discharge/recharge) for NiMH/NiCd batteries to improve performance.
Instructions for charging lead-acid batteries, emphasizing the 1/10th capacity charge rate.
Guides on discharging lead-acid batteries, including setting voltage and number of cells.
Details how to set channel power and monitor DC output load using the charger's interface.
Guides on saving and configuring up to 10 charge/discharge profiles per channel for convenience.
Explains how to recall stored battery profiles, allowing quick setup for previously used batteries.
Configures an integral safety timer to prevent overcharging, with adjustable duration.
Sets a maximum charge capacity limit to automatically stop the process when reached.
Allows setting a temperature threshold to terminate charging if the battery overheats.
Sets a minimum input voltage to protect the power source battery from deep discharge.
Enables Channel 2 to mirror Channel 1's operations for synchronized charging.
Disclaimer stating SkyRC's non-liability for improper use, damage, or costs incurred.
Outlines the one-year warranty terms, exclusions, and procedures for service.
To Next Page
