Skytech H100 - Boat Battery Installation and Maintenance; Inserting Battery into the Boat; Lubrication of Spindle Tube

-4-
Inserting battery into the boat
Iubrication oil on the spindle tube wall
3.Connect the battery and power plug.
1.To the right or left turn on the switch of cabin, open up the cabin cover.
4.The cabin cover oblique inserted into the hull.
5.Tamp down the cabin cover.
6.Twisting the left/right of the switch until cocking the cabin cover.
2.Put the li-po into the battery holder of the hull.
fig.1
fig.2 fig.3
fig.6
fig.5fig.4
fig.1
fig.2
fig.3
fig.6
fig.5fig.4
fig.7 fig.8
fig.9