SkyVac Interceptor - Hose Connections and Drum Management; Connecting Suction and Blow Hoses; Wet Pickup and Float Valve; Emptying the Collection Drum

WET PICK UP
The vacuum cleaner contains a oat valve that automacally closes when liquid
reaches its predetermined level in the tank. This is indicated by a change of sound
of the vacuum cleaner and suspension of pick—up. The cleaner should be turned
o when the oat valve closes and emped
Check the oat valve is clean and free to operate prior to wet pick up
CONNECTING THE HOSE SUCTION FEATURE
When vacuuming, the hose is connected directly
to the drum. PUSH the hose end directly into the
drum, and it will lock into place. To remove the
hose LIFT the “catch” under the drum inlet (hose
connecon) and withdraw the hose from the inlet.
CONNECTING THE HOSE BLOW FUNCTION
FEATURE
When using the BLOW funcon feature, the hose
is connected directly to the exhauster outlet
adapter. Li the knob and insert the hose end,
then release the knob when the hose is fully
inserted and it will lock it into posion. To release
the hose, li the knob and withdraw the hose
HOW TO EMPTY THE DRUM
Remove the head from the drum, lt the drum forward using the handles