SkyVac Interceptor - Accessories and Filter Maintenance; Fitting the Sieve Basket; Cleaning the Main Filter; Filter Deflector Plate Alignment

The sieve basket will collect the debris and the water
will run through the basket and sit in the boom of
the drum. To dispose of the water switch the
machine o, disconnect the drain hose on the side of
the drum and release the ball valve. Set to one side
on the ground to allow the water to ow away. To
dispose of the debris collected in the sieve basket
remove from the drum and p away.
FITTING THE OPTIONAL SIEVE BASKET
Take the head of the drum and insert the basket feet rst unl it sits on the
boom of the drum. Insert the outer black plasc ring on top of the sieve
basket to lock it into posion
CLEANING THE FILTER
It’s important to keep the lter clean. To clean the
lter, remove the base plate and clean with a hand
broom making sure to remove all debris from the
open pleats. Aer every shi it would be worth
cleaning with a hose pipe, ensure the lter is dry
before re-using. Keep the lter in place for both dry
and wet pick up.
FILTER DEFLECTOR PLATE
To ensure the lter deector plate is ed in the
correct posion the inlet tube needs to be in line
with the sucon port