SkyVac Interceptor - Handling Carbon Poles for Debris

Push the
end cu
over your
base pole
Build your poles up against
the wall
Lean them against the wall
with the logo facing upwards.
Fit your selected end tool on
the top pole rst then feather
the poles upwards unl you
reach your desired height.
Always t the Vac Release
Pole as your base pole
Your carbon poles are extremely strong.
However, avoid over straining/bending
them when handling heavy grass
deposits. The Best way to remove heavy
tus of grass from guers is to chop them
down into manageable lengths.
Place sucon end tool on the grass tu
and li away from guer then open up
Vac Release door to cut the sucon. This
will release the grass from the end tool.
IMPORTANT ensure you can drop the grass
safely to the ground