SkyVac MIGHTY ATOM - POLE OPERATION AND MAINTENANCE; VAC RELEASE POLE USE; POLE MAINTENANCE

9
1. The skyVac® Vac Release pole should always be the base pole, closest to the operator.
2. Ensure the intended “drop” area below is clear .
3. Place the end tool over the guer turf and when securely held , li the turf up out of
the guer.
4. Rotate the Vac cu chamber, clockwise, allowing air into the chamber and cung
sucon. The Turf will drop.
5. Close the Vac chamber by twisng an-clockwise to restart the sucon.
TOP TIP:
Spray a clean cloth with WD40. Give the top and base of each clean and dry pole, a good wipe both in-
side and outside of the join area.