20
TECHNICAL DATA
The PEPPER2 light Reserve chute is manufactured under the highest quality standards
of durability, and offers the pilot the quickest opening time with a minimum of sink
speed, a high level of stability associated with oscilation, and a very small packing
volume. The PERPPER2 light Reserve chute is a round capped concentric single line
Reserve chute with a middle vertex structure with separately sewn fabric widths. Each
track width of cloth is optimally cut and sown to reduce differential air permeability,
uses a special manufacturing process and material mix to offer the highest level of
construction and design.
DESCRIPTION PULL DOWN APEX PARABOLIC TYPE
RESCUE PARACHUTE
Size S M L
Area 27 m
2
35 m
2
40 m
2
No. of gores 16 18 20
Line length 4.71 m 5.3 m 5.7 m
Center line 5.24 m 5.89 m 6.34 m
Weight 1,3 kg 1,6 kg 1,9 kg
Sink Rate (at Max. Load) 5.067 m/s 5.034 m/s 5.13 m/s
Maximum load 80 kg 100 kg 120 kg
Certification EN EP 049.2011 EP 050.2011 EP 051.2011
INSTRUCTIONS FOR USE
The PEPPER2 light Reserve chute is a safety device for paragliding purposes and is
certified and to be used exclusively for this purpose. Use this device only in emergency
situations and do not deploy it just for fun. If you have decided while in flight to use this
device for such a situation, pull the release handle with a strong impulse. The releasing
pin or splint will then be pulled free, the outer container will fall and open, and the pilot
still holding the release grip should throw the Reserve with the inner container with a
strong swinging impulse into the free airspace. Through the acceleration and force
of the swing and the weight of the inner container, the Reserve chute with the lines
extending, will be pulled free of the inner container and start to open.
To Next Page
Loading...
Need help?
General