14
STEP 13
Place the frame pad (6) on top of the springs. Adjust the frame pad so that
the slits are directly above the T-sockets.
Important: Don’t use the trampoline without the frame pad. It’s designed to
protect your little jumpers! Trust us on this one.
Frame Pad (x1)
6
STEP 14
Look under the trampoline. Find the straps that are attached to the underside of the frame pad (6). Position
the outer straps so that one strap is on each side of the frame. Position the inner straps so that one strap is
threaded through a V-ring. Now tie all of the straps in bows. (Because if you tie them in knots, you’ll have a
pretty hard time untying them ever again!)
Socket
Slit of Pad
(6)
Inner strap
Underside of trampoline
Outer strap
ASSEMBLY
To Next Page
Loading...
