Re
ceiver Firmware
1, Take the receiver out, hold the boot button when connect the receiver to the computer.
2,Computer will automatically install the driver , computer will show a new removable storage .
3, Co
py the Firmware File to the folder(Not the SD card). goggles will installing the update at the same
time. when the copy process is done, the firmware upgrade is done.
Charging
· e goggles inte rated with charging modu e barrel connectorTh g l ， ser can cho se US harg or u o B c e use
charge.
·when goggles is powered via barrel connector ，the external power is also charging the internal
18650 battery.
·DC and Type C can both charge the internal 18650 battery.
·For safety， do not charge the battery unattended .
· The 18650 battery bay have protection circuit, if remove the battery without turn off the goggle, the
battery will in protection status, to quit protection, the goggle need use DC cable or USB cable to charge
the battery to quit this mode.
·
This content is subject to change, download latest version from:
7
www.skyzonehobbies.com
To Previous Page
Loading...
