EasyManua.ls Logo

Slaughter 2935 - Page 29

Default Icon
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
23
Power Cable
BEFORE CONNECTING POWER TO THIS INSTRUMENT, THE
PROTECTIVE GROUND (EARTH) TERMINALS OF THIS INSTRUMENT
MUST BE CONNECTED TO THE PROTECTIVE CONDUCTOR OF THE LINE (MAINS)
POWER CORD. THE MAIN PLUG SHALL ONLY BE INSERTED IN A SOCKET OUTLET
(RECEPTACLE) PROVIDED WITH A PROTECTIVE GROUND (EARTH) CONTACT. THIS
PROTECTIVE GROUND (EARTH) MUST NOT BE DEFEATED BY THE USE OF AN
EXTENSION CORD (POWER CABLE) WITHOUT A PROTECTIVE CONDUCTOR
(GROUNDING).
This instrument is shipped with a three-wire power cable. When this cable is connected
to an appropriate AC power source, this cable connects the chassis to earth ground. The
type of power cable shipped with each instruments depends on the country of destination.
Operating Environment
This equipment is intended for indoor use only. The equipment has been evaluated
according to Installation Category II and Pollution Degree 2 as specified in IEC 664.
This instrument may be operated within the following environmental conditions:
Temperature………….32° - 104° F (0° - 40° C)
Relative humidity …….0 - 80%
Altitude ………………6,560 feet (2,000 meters)
STORAGE AND SHIPMENT
Environment
This instrument may be stored or shipped in environments with the following limits:
Temperature.................-40° - 167° F (-40° - 75°C)
Altitude............................ 50,000 feet (15,240 meters)
The instrument should also be protected against temperature extremes which may cause
condensation within the instrument.
Packaging
Original Packaging: Please retain all original packaging materials if you do not have an
alternate method of repackaging. If you are returning your instrument to us for servicing
please repackage the instrument in its original container or use an alternate packaging
solution. Please do not reuse the original packing material if there appears to be damage
or missing packing material. Contact our customer support department (1-800-504-0055)
for an RMA (return materials authorization) number. Please enclose the instrument with
all options, accessories, and test leads. Indicate the nature of the problem or type of
service needed. Also, please mark the container "FRAGILE" to insure proper handling.
WARNING

Related product manuals