INSTALLATION
Other Packaging: If you do not have the original packaging materials please follow these
guidelines:
1). Wrap the instrument in a bubble pack or similar foam. Enclose the same information
as above.
2). Use a strong double-wall container that is made for shipping instrumentation. 350 lb.
test material is adequate.
3). Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all
sides of the instrument. Protect the control panel with cardboard.
4). Seal the container securely.
5). Mark the container "FRAGILE" to insure proper handling.
6). Please ship models 2925, 2935, and 2945 via Federal Express or UPS air.
7). Please refer in all correspondence to your RMA number.
Field Installation Of Options
There are no field installable options on the model 2925, 2935, or 2945.
To Next Page
Loading...
