Slime 40022 - Product Features and Operation; Key Features Overview; Digital Gauge Operating Instructions

ADAPTERS
FOR BALLS &
INFLATABLES
DIGITAL GAUGE OPERATING INSTRUCTIONS:
1. Hold the + or – button for approximately 5 seconds until the display flashes. Set
the required pressure using the + or – buttons, then wait 2-3 seconds. The display
will show the pressure value to which the tire will be inflated.
2. Push the ON/OFF button for the inflator to start. When the pressure gauge
reaches the pre-set value, the inflator will automatically switch off and the display
will show “OFF”.
3. The ON/OFF button can be used to override the present pressure value if
required.