VACUUM USAGE INSTRUCTIONS:
Remove expandable vacuum hose from base of unit, and
insert open end of the vacuum hose into the green suction
port on the back of the vacuum unit.
Plug power cord into 12 volt accessory power outlet.
The crevice/dusting tool accessory comes attached to the hose.
To use crevice tool, push in button lever located on side of
dusting tool and slide tool down. The crevice/dusting tool may
be removed from the hose if needed by pulling directly off of
the hose at base of the dusting tool attachment.
Use the toggle switch to power the vacuum by sliding it to the
vacuum icon. When finished using the vacuum, slide the toggle
switch to the middle “OFF” position to turn vacuum off and
unplug power cord. Disconnect the expandable vacuum hose
and place in the hose storage area on the base of the unit.
1
3
4
2
To Next Page
Loading...
