To Next PageTo Next PageWhy is my Slime Automobile Accessories inflator running so slowly?
If your Slime Automobile Accessories inflator is running slowly, it might have overheated due to extensive use. To resolve this, turn the inflator off and let it cool down for about 25 minutes before using it again.
What to do if Slime Automobile Accessories inflator runs but does not inflate?
If your Slime Automobile Accessories inflator runs but doesn't inflate, make sure the air hose valve connector is fully secured to the tire valve. Also, inspect the tire for any leaks. Check the hose for breaks and leaks, particularly at the fittings, and examine the valve core for damage. Finally, ensure that the hose isn't pinched or kinked, as this can block the airflow.
General| Brand | Slime |
|---|---|
| Model | 40070 |
| Category | Automobile Accessories |
| Language | English |
Highlights main components like dial gauge, 20 ft. hose, and power plug.
Emphasizes reading all instructions to prevent injury or property damage.
Mandatory ventilation for vehicle exhaust to prevent asphyxiation and ensure safe operation.
Details performance metrics: inflation time, CFM, gauge limits, power, and hose length.
Procedure for connecting and inflating tires to the recommended air pressure.
Instructions for secure inflator mounting using wall studs and provided hardware.
Procedure for installing the inflator onto drywall using anchors and screws.
Guide on how to properly connect and lock air hose adapters for inflation use.
Resolving problems when the inflator does not turn on, checking fuse and power.
Diagnosing and fixing issues with the inflator not inflating or running slowly.
Details electrical ratings, operating time limits, max pressure, and eco-friendly disposal.
