1 PV Load Switch (Optional)
Illustration 1.1
NOTICE
The PV load switch can be secured in the ‘Off’ position
using a padlock (not part of delivery).
WARNING
RISK OF ELECTRIC SHOCK
These servicing instructions are for use by qualified
personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that specified in
the operating instructions unless you are qualified to do
so.
CAUTION
All persons installing and servicing inverters must be:
•
Trained and authorised in general safety rules
for work on electrical equipment.
•
Familiar with local requirements, rules, and
regulations for the installation.
CAUTION
The temperature of the cooling racks and components
inside the inverter can exceed 70 °C/158 °F. Observe the
danger of burn injury.
The inverter is to be installed so that it is not expected
to be contacted by persons.
Conformity
Go to the download area at www.sma.de, Approvals and
Certifications, for information.
See also the MLX Installation Guide.
IMPORTANT SAFETY INSTRUCTIO...
L00410608-01_2t – Rev. 2014-09-08
To Next Page
Loading...
