Need help?Do you have a question about the SMA DATA MANAGER M and is the answer not in the manual?
Describes the product's purpose, limitations, and conformity to regulations.
Provides critical safety information to prevent injury and damage.
Specifies conditions and precautions for selecting a mounting location.
Provides instructions for mounting on a DIN rail or wall.
Guides on connecting RS485 devices using Modbus RTU.
Details the procedure for connecting the product to a power supply.
Steps for establishing a direct Wi-Fi connection to the product.
Guides on connecting the product to a local network via Ethernet.
Procedure for initial product setup and user interface login.
Process for registering the product and system in Sunny Portal.
Sets specifications for limiting active power feed-in as per grid operator.
Sets reactive power as a function of grid voltage Q(V).
Explains automatic and USB flash drive methods for firmware updates.
General| Power Supply | 24 V DC |
|---|---|
| Protection Class | IP20 |
| Communication Interfaces | Ethernet |
| Max. Number of Devices | 50 |
| Operating Temperature Range | -20 °C ... +60 °C / -4 °F ... +140 °F |
| Ethernet | Yes |
| Supported Protocols | Modbus |
To Next Page
