Need help?Do you have a question about the SMA SUNNY TRIPOWER 8.0 and is the answer not in the manual?
General| AC Nominal Power | 8000 W |
|---|---|
| Max. DC Voltage | 1000 V |
| Number of MPP Trackers | 2 |
| Operating Temperature Range | -25 °C to +60 °C |
| Topology | Transformerless |
| Max. Apparent AC Power | 8000 VA |
| Max. Efficiency | 98.4 % |
| Protection Class | IP65 |
| Maximum DC Power | 12000 W |
| Frequency Range | 50 Hz / 60 Hz |
| Cooling | Convection |
| Nominal AC Voltage | 230 V / 400 V |
| AC Voltage Range | 180 V - 280 V |
Details DANGER warnings for electric shock, fire, and explosion risks.
Covers risks from toxic substances, overvoltage, burns, weight, and cleaning notices.
Lists all components included in the package and label information.
Procedure for grid connection and adding grounding.
Procedure for connecting the PV array to the inverter.
Step-by-step guide for initial setup and configuration.
Requirements and procedure for switching on the inverter.
Overview of options for configuring the inverter.
Methods to connect to the inverter's user interface via Ethernet and WLAN.
Procedures for logging in, out, and navigating the user interface.
Starting the installation assistant and activating the Smart Inverter Screen.
Details on changing passwords and adjusting operating parameters.
Methods for adopting configurations and updating firmware.
Step-by-step guide for safely disconnecting the inverter.
Procedure to recover a forgotten password using a PUK.
Troubleshooting grid faults related to voltage and impedance.
Detailed procedures for identifying and resolving ground faults.
Procedures for checking ground faults by measuring voltages.
Methods for locating faults and measuring insulation resistance.
Steps for calculating and testing insulation resistance.
Steps for safely disconnecting and removing components.
To Next Page
