SMA DATA MANAGER M - Decommissioning the Product

11 Decommissioning the Product
SMA Solar Technology AG
Operating manualEDMM-10-BE-en-2762
11 Decommissioning the Product
WARNING
Danger to life due to electric shock
Lethal voltages are present at the connection point of the utility grid.
• Disconnect the connection point from the utility grid using the separator (e.g. miniature
circuit breaker).
1. Pull the two-pole power supply unit plug out of the jack X1 on the DataManager.
2. Release the RJ45 network cable plug and pull out of the network port X4 or X5 on the
DataManager.
3. Pull the six-pole power supply unit plug out of the jack X3 on the DataManager.
4. If mounted on a DIN rail: detach the DataManager
from the DIN rail. Tilt the lower edge of the
DataManager forwards and lift it up and off the
DIN rail.
2
1
ennexOS
D
A
T
A MANAGER
5. If mounted on a wall: remove the screws from the brackets and remove the DataManager.
6. If the DataManager is to be disposed of, dispose of the DataManager in accordance with
the locally applicable disposal regulations for electronic waste.