Need help?Do you have a question about the SMA Sunny Boy Series and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Operating temperature range | -25 °C to +60 °C |
| Protection Degree | IP65 |
| AC Power Output | Varies by model |
| Number of MPP Trackers | 1 or 2, depending on the model |
| Cooling | Convection |
| Warranty | 5 years standard, extendable |
Document describes connection options and operating modes for multifunction relay and OptiTrac Global Peak.
Document is intended for users and installers; some tasks require electrically qualified persons.
Details on connection in installation manuals; further info at www.SMA.de/en.
Explains safety symbols (DANGER, WARNING, CAUTION, NOTICE) and information icons.
Multifunction relay for switching loads; OptiTrac for performance optimization in shaded PV modules.
Details safety measures for high voltages, electrostatic discharge, and high contact loads.
Lists applications: fault indicator, self-consumption, load control, battery charging, fan control, grid feed-in.
Describes relay connections for fault indicator or load switching using different positions.
Details wiring for indicating operation or error messages using the relay.
Explains connecting relay to control a load via contactor, with examples.
Connects multiple relays in parallel to signal grid operator about grid connection status.
Explains configuration of operating modes and settings via RS485 or Bluetooth.
Details selecting modes like Fault Indicator, Self-Consumption, Fan Control, etc.
How to use the relay as a fault indicator, displaying errors or undisturbed operation.
Configuration for switching loads based on PV power and minimum duration.
Automatic fan activation based on device temperature relative to derating thresholds.
Allows switching the relay via the inverter's communication interface.
Controls battery charging based on minimum power thresholds and time delays.
Relay switches simultaneously with the inverter's grid relay.
Provides specifications for switching voltage, current, terminals, and electrical endurance.
How to activate the function for improving PV system yield in shaded conditions.
Configuration of the interval for analyzing the PV array's operating point.
To Next Page
