Need help?Do you have a question about the SMA SUNNY BOY 1.5 and is the answer not in the manual?
General| Model | SUNNY BOY 1.5 |
|---|---|
| Power Rating | 1.5 kW |
| AC voltage range | 180-260 V |
| Max. input voltage | 600 V |
| Max. input current | 10 A |
| Maximum DC Input Voltage | 600 V |
| Number of MPP Trackers | 1 |
| Topology | Transformerless |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Degree | IP65 |
| AC nominal voltage | 230 V |
| MPP voltage range | 175 V - 500 V |
| Maximum DC Input Power | 1.8 kW |
| MPPT Voltage Range | 175 V - 500 V |
| Nominal AC Output Power | 1.5 kW |
| Maximum AC Output Power | 1.5 kW |
| Nominal AC Voltage | 230 V |
| Nominal AC Frequency | 50 Hz / 60 Hz |
| Cooling | Convection |
Defines product purpose, suitability, and operational conditions.
Provides essential safety guidelines to observe when working with the product.
Lists essential requirements for selecting a suitable mounting location.
Provides step-by-step instructions for physically mounting the inverter.
Highlights critical safety precautions for electrical connections.
Details the process and requirements for connecting the AC power.
Explains how to connect the DC input from the PV array.
Outlines the sequential steps for commissioning the inverter.
Lists requirements and steps for the initial inverter startup.
Explains how to configure the inverter using various methods.
Guide to modifying inverter settings for optimal performance.
Steps to launch and use the guided installation setup.
How to set correct country parameters for local grid compliance.
Steps to configure grid feed-in management per operator requirements.
Procedure to identify and diagnose ground faults in the PV system.
To Next Page
