ANATEL
The product complies with the requirements of the Brazilian standards for
telecommunication.
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.
4.2 Interfaces and Functions
The inverter is equipped with the following interfaces and functions:
User interface for the monitoring and configuration of the inverter
The inverter is standard-equipped with an integrated web server, which provides a user interface for
configuring and monitoring the inverter. The inverter user interface can be called up via the web
browser if there is an existing WLAN or Ethernet connection to a computer, tablet PC or
smartphone.
SMA Speedwire
The inverter is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. This enables inverter-optimized 10 or 100Mbit
data transmission between Speedwire devices in PV systems and the user interface of the inverter.
SMA Webconnect
The inverter is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the inverters of a small-scale system and the Internet
portal SunnyPortal without any additional communication device and for a maximum of 4 inverters
per SunnyPortal system. If there is an existing WLAN or Ethernet connection, you can directly
access your Sunny Portal system via the web browser on the computer, tablet PC or smartphone.
Webconnect enables - for PV systems operated in Italy - the connection or disconnection of the
inverter to or from the utility grid and the specifying of the frequency limits to be used via
IEC61850-GOOSE messages.
4Product Description
SMA Solar Technology AG
Operating ManualSB15-25-1VL-40-BE-en-1116